Home > Media Converters
10/100BaseT/TX Ethernet Extender Media Converter Print E-mail


065-1167 RoHS

 

Overview

OVERVIEW

 

Signamax Connectivity Systems' model 065-1167 is a point-to-point Ethernet Extender that efficiently extends 10/100 Ethernet circuits to over 1,960 feet (600 meters) at 30 Mbps using existing straight pair copper wire. The 065-1167 allows Ethernet connectivity in existing facilities without pulling extra cable. This is the perfect solution to Ethernet on the factory floor where systems have been upgraded from slower serial data communication to Ethernet networking. The 065-1167 is used in pairs to extend Ethernet connectivity over existing voice grade copper wire. Installation is easy; a single switch setting allows each unit to be set either for local operation at the near side of the circuit, or remote operation when used at the other end of the circuit.

 

Key Features

KEY FEATURES

  • Operates transparently to higher layer protocols such as TCP/IP.
  • Ethernet Port: 10/100 Mbps; Full/Half-duplex operation with Auto-Negotiation andAuto-MDI/MDIX.
  • Ethernet Extender (RJ-11) Port: Eight speeds with speed indicator LEDs on top of unit;
  • Up to 30 Mbps @ 1,968 feet (600 meters) down to 1 Mbps @ 6,233 feet (1,900 meters); supports symmetrical VDSL operation.
  • High-speed full-duplex 30 Mbps communications link capability over existing copper wire.
  • Single configuration DIP switch for local or remote operation on RJ-11 Ethernet Extender port.
  • -4° F to 140° F (-20° C to 60° C) operating temperature range.
  • Hardened aluminum case; compatible with Signamax 065-1185 Rack Mount Chassis for multiple or mixed media converter type installations.
  • Also supports DIN-Rail or wall mounting installation.

 

Specifications

SPECIFICATIONS

  • APPLICABLE STANDARDS

IEEE 802.3 (10BaseT Ethernet);
IEEE 802.3u (100BaseTX Fast Ethernet);
Ethernet over VDSL

  • PORTS

1 x RJ-45 Twisted Pair; 10/100BaseT/TX
1 x RJ-11 Ethernet Extender

  • DATA RATES & DISTANCES SPANNED

Twisted Pair Ethernet Port: 10 Mbps or 100 Mbps; 100 meters
Ethernet Extender Port:
Up to 30 Mbps @ 1,968 feet (600 meters) down to 1 Mbps @ 6,233 feet (1,900 meters);
supports symmetrical VDSL operation.
Cable: Telephone line 24 AWG (0.5mm diameter, 1-pair wire) or larger.

  • STATUS LEDs

End Panel:
Per Unit:
PWR (green): Illuminates under normal operation.

10/100BaseT/TX Port (labeled Ethernet):
Lnk/Act (green): Illuminated when receiving link pulses from compliant devices;
flashing when data packets are being transmitted or received.
Fdx (green): Illuminated when the Ethernet port has auto-negotiated to full-duplex operation.

Ethernet Extender Port (labeled Line):
Lnk (green): Illuminated when receiving link pulses from the device at the opposite end of the circuit.
Err (green): Illuminated when the Ethernet Extender port has detected an errored packet.
Loc (green): Illuminated when the converter has been switch-selected as the LOCAL device.
Rmt (green): Illuminated when the converter has been switch-selected as the REMOTE device.

Top Panel:
Ethernet Extender (Line) Port Speed:
LED 1 (green/amber): Illuminates green @ 1 Mbps (1,900m / 6,232ft.), amber @ 3 Mbps (1,800m / 5,904ft.);
not illuminated at other speeds.
LED 2 (green/amber): Illuminates green @ 5 Mbps (1,600m / 5,249ft.), amber @ 10 Mbps (1,400m / 4,593ft.);
40 Mbps when amber and LED 4 is also illuminated amber (600m / 1,968ft.).
LED 3 (green/amber): Illuminates green @ 15 Mbps (1,200m / 3,936ft.), amber @ 20 Mbps (1,000m / 3,280ft.);
50 Mbps when amber and LED 4 is also illuminated amber (300 m / 984 ft.).
LED 4 (green/amber): Illuminates green @ 25 Mbps (800 m / 2,624 ft.), amber @ 30 Mbps (700 m / 2,296 ft.);
see above for speeds when amber and LED 2 or 3 is also illuminated amber.

  • PERFORMANCE

Ethernet Port Throughput @ 100Base: 148,810 pps (64-byte packets)
Ethernet Extender (Line) Port Throughput: Distance-dependent; please see above.

  • ENVIRONMENT

Operating:
Temperature: -4° F to 140°F (-20° C to 60° C)
Relative Humidity: 10% to 95%, non-condensing
Non-Operating/Storage:
Temperature: -4° F to 158° F (-20° C to 70° C)
Relative Humidity: 10% to 95%, non-condensing

  • ELECTRICAL REQUIREMENTS

Power Supply: 12 Volts DC, 800 mA
Power Consumption: 2.4 Watts Maximum; 200 mA @ 12 Volts DC

  • PHYSICAL CHARACTERISTICS

Dimensions: 4.30 x 3.16 x 0.94 inches [D x W x H] (109.2 x 80.3 x 23.8 mm)
Weight: 0.33 lbs. (150 grams)

  • CERTIFICATIONS

Safety: UL508, EN60950-1, IEC60950-1; CE Mark
EMI: FCC Part 15 Class A; EN61000-6-3; EN55022; EN61000-3-2; EN61000-3-3

EMS:
ESD Standards (IEC 61000-4-2):
Enclosure Contact: + / - 4KV; Criteria B;
Enclosure Air: + / - 8KV; Criteria B

Radiated FRI Standards (IEC 61000-4-3):
Enclosure Ports: 10V/m, 80 to 1000MHz, 80% AM; Criteria A

Burst Standards (IEC 61000-4-4):
Enclosure Ports: + / - 4KV @ 2.5 KHz; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
A.C. Power Ports: + / - 4KV; Criteria B

Surge Standards (IEC 61000-4-5):
Signal Ports: + / - 1KV; Line-to-line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
A.C. Power Ports: + / - 2KV; Line-to-earth; Criteria B

Induced RFI Standards (IEC 61000-4-6):
Signal Ports: 10V RMS @ 0.15-80MHz, 80% AM; Criteria A
D.C. Power Ports: 10V RMS @ 0.15-80MHz, 80% AM; Criteria A
A.C. Power Ports: 10V RMS @ 0.15-80MHz, 80% AM; Criteria A
Earth Ground Ports: 10V RMS @ 0.15 - 80MHz, 80% AM; Criteria A

Magnetic Field Standards (IEC 61000-4-8):
30A/m @ 50, 60Hz; Criteria A

Voltage Dip Standards (IEC 61000-4-11):
A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B

Environmental Test Compliance:
Vibration Resistance (IEC 60068-2-6fc):
5G @ 150Hz, Amplitude 0.35 mm (Operation/Storage/Transport)
Shock (IEC 60068-2-27 Ea):
25G @ 11ms (Half-Sine Shock Pulse; Operation);
50G @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
Free Fall (IEC 60068-2-32 Ed): 1 Meter (3.281 ft.)

  • WARRANTY

Lifetime


Downloads

DOWNLOADS

 

Download Datasheet (PDF 990 Kb) Revised 09.11.2008

 

icon_pdf_16x20Download User’s Guide (PDF 869 Kb) Revised 09.01.2008

 

Download DIN Rail Mounting Instructions (PDF 16 Kb) Revised 10.08.2010

 

Ordering Information

ORDERING INFORMATION

Part Number

Description

065-1167

10/100BaseT/TX Ethernet Extender Media Converter

065-1167DIN

10/100BaseT/TX Ethernet Extender Media Converter with preattached DIN-rail mount