Overview

OVERVIEW

Signamax Connectivity Systems' 065-1600 series Standalone Managed Switching 10/100 Media Converters are individually-housed SNMP-managed media converters available with singlemode and multimode interfaces to provide copper-to-fiber conversion for mis-sion-critical networks. They are typically used as circuit endpoint devices in concert with the Signamax Managed Media Converter Rack Mount Chassis System to enable network managers to remotely monitor the status of their entire fiber optic Fast Ethernet net-work all the way to the fiber optic circuit's last termination. An individual SNMP management agent is included with each Signamax 065-1600 series standalone managed converter. Equipped with Link Fault Signaling (LFS) and Loopback Testing capabilities, they ex-tend the enterprise LAN configuration range up to 60 km while simultaneously minimizing downtime and technician dispatch expense.

Key Features

KEY FEATURES

• Intelligent Diagnostics for Fault Self-Detection
• External Loopback Capability
• Supports Broadcast Suppression
• Programmable Maximum Ethernet Frame Length Ranging from 1522 to 1536 bytes
• Supports Web-Based and Text-Based Management User Interface
• Supports SNMP with RMON
• Supports Bandwidth Rating Management
• Supports TFTP for Firmware Upgrades
• Supports DHCP Client
• Supports E-mail Client (SMTP RFC 821) and Mobile Phone Short Message (SMS) for Sending Traps and Alarm Messages
• Built-in Twisted-Pair Port 10/100 Switch with Store-and-Forward Architecture
• Auto-Negotiation RJ-45 Connector with Auto-MDIX
• LEDs for Functions, Links & Activity
• Singlemode Spans up to 60 Km
• Lifetime Performance Warranty

Specifications

SPECIFICATIONS

• APPLICABLE STANDARDS

IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3u 100BaseFX

• FIXED PORTS

Models: 065-1600/1610/1620/1620ED/1620XLD
1 Auto-MDIX twisted-pair port meeting IEEE 802.3 10BaseT & IEEE 802.3u 100BaseTX standard specifications; Category 5 or bet-ter cable, 100 meters maximum distance for 100BaseTX, Category 3 or better cable, 100 meters maximum distance for 10BaseT
plus
1 fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 62.5/125 or 50/125 micron multimode fiber optic cable, 2,000 meters maximum distance
or
1 fiber optic port meeting IEEE 802.3u 100BaseFX standard specification; 9/125 micron singlemode fiber optic cable, spanning: 15 kilometers maximum distance (Model 065-1620)
or
40 kilometers maximum distance (Model 065-1620ED)
or
75 kilometers maximum distance (Model 065-1620XLD)

• LED INDICATORS

Per Unit: Power status, RJ-45 port speed
Per Port: LNK/ACT, FDX/COL
Six LEDs total

• PERFORMANCE

Latency: < 4.2 µs (LIFO)
Throughput @ 100Base: 148,809 pps (64-byte packets)
Speed:
100BaseTX: 100/200 Mbps for half/full duplex
10BaseT: 10/20 Mbps for half/full duplex
Switching Method: Store-and-Forward
Maximum MAC Addresses: 1,024 entries
Memory: 256 KB

• FIBER INTERFACE, MULTIMODE MODELS

Type: LED
Wavelength: 1300 nm nominal (1270 nm maximum, 1380 nm minimum)
Maximum Output Power: - 14.0 dBm
Minimum Output Power: - 20.0 dBm
Sensitivity: -33.0 dBm
Maximum Input Power: - 8.0 dBm
Link Power Budget: 13.0 dB

• FIBER INTERFACE, SINGLEMODE PN 065-1620

Type: MQW Laser
Wavelength: 1300 nm nominal (1260 nm maximum, 1360 nm minimum)
Maximum Output Power: - 7.0 dBm
Minimum Output Power: - 15.0 dBm
Sensitivity: -34.0 dBm
Maximum Input Power: - 7.0 dBm
Link Power Budget: 19.0 dB

• FIBER INTERFACE, SINGLEMODE PN 065-1620ED

Type: MQW Laser
Wavelength: 1300 nm nominal (1261 nm maximum, 1360 nm minimum)
Maximum Output Power: - 5.0 dBm
Minimum Output Power: - 12.0 dBm
Sensitivity: -35.0 dBm
Maximum Input Power: - 5.0 dBm
Link Power Budget: 23.0 dB

• FIBER INTERFACE, SINGLEMODE PN 065-1620XLD

Type: MQW Laser
Wavelength: 1300 nm nominal (1270 nm maximum, 1350 nm minimum)
Maximum Output Power: + 3.0 dBm
Minimum Output Power: - 3.0 dBm
Sensitivity: -37.0 dBm
Maximum Input Power: - 0.0 dBm
Link Power Budget: 34.0 dB

• PHYSICAL CHARACTERISTICS

Case dimensions: 4.33"L x 3.19"W x 0.91"H (110 mm x 81 mm x 23 mm)
Fiber connector protrusion varies with model
Weight: 0.33 pounds (150 grams)

• ENVIRONMENTAL CHARACTERISTICS

Operating Temperature: 32°F ~ 104°F (0°C ~ 40°C)
Storage Temperature: -13°F ~ 158°F (-25°C ~ 70°C)
Relative Humidity: 10 ~ 90%, non-condensing

• POWER

External power adapter: 12 Volts DC; 600 mA
Power Consumption: 5 Watts Maximum

• EMISSIONS

FCC part 15 Class A, CISPR Class A, VCCI Class A, CE Mark

• SAFETY

UL Listed

• WARRANTY

Lifetime

Downloads

DOWNLOADS

Download Datasheet (PDF174 Kb) Revised 05.23.2006

Download User's Guide (PDF 10.3 Mb) Revised 10.7.2005

Ordering Information

ORDERING INFORMATION